Spec

Code-Snippets

curl "https://api.oanor.com/wellpump-api/v1/meta" \
  -H "x-oanor-key: oanor_test_..."

await fetch("https://api.oanor.com/wellpump-api/v1/meta", {
  headers: { "x-oanor-key": "oanor_test_..." }
});

$ch = curl_init("https://api.oanor.com/wellpump-api/v1/meta");
curl_setopt($ch, CURLOPT_HTTPHEADER, ["x-oanor-key: oanor_test_..."]);
curl_setopt($ch, CURLOPT_RETURNTRANSFER, true);
$out = curl_exec($ch);

import requests
requests.get(
    "https://api.oanor.com/wellpump-api/v1/meta",
    headers={"x-oanor-key": "oanor_test_..."}
)

Beispiel-Response

Echte Antwort dieses Endpoints, erfasst beim letzten Health-Check.

{
    "data": {
        "notes": "US units (feet, inches, gallons, GPM). gal/ft = π/4·D²·12/231; specific capacity = rate/drawdown; pump setting = static + drawdown + submergence. Estimates — verify with a real drawdown test. For pump power/head use a pump API; for well chlorination use a pool-chemistry API.",
        "service": "wellpump-api",
        "endpoints": {
            "GET /v1/meta": "This document.",
            "GET /v1/pump-setting": "Pump setting depth below the pumping water level.",
            "GET /v1/casing-volume": "Standing water gallons and gallons per foot for a casing.",
            "GET /v1/specific-capacity": "Specific capacity (gpm/ft) and projected yield from a pumping test."
        },
        "description": "Water-well maths: standing water in a casing, specific capacity and projected yield from a drawdown test, and the pump setting depth."
    },
    "meta": {
        "timestamp": "2026-06-06T23:53:58.970Z",
        "request_id": "9c7e6292-48fd-4b75-a5bf-ee657133c4b3"
    },
    "status": "ok",
    "message": "Meta",
    "success": true
}