Spec

Code-Snippets

curl "https://api.oanor.com/spokelength-api/v1/meta" \
  -H "x-oanor-key: oanor_test_..."

await fetch("https://api.oanor.com/spokelength-api/v1/meta", {
  headers: { "x-oanor-key": "oanor_test_..." }
});

$ch = curl_init("https://api.oanor.com/spokelength-api/v1/meta");
curl_setopt($ch, CURLOPT_HTTPHEADER, ["x-oanor-key: oanor_test_..."]);
curl_setopt($ch, CURLOPT_RETURNTRANSFER, true);
$out = curl_exec($ch);

import requests
requests.get(
    "https://api.oanor.com/spokelength-api/v1/meta",
    headers={"x-oanor-key": "oanor_test_..."}
)

Beispiel-Response

Echte Antwort dieses Endpoints, erfasst beim letzten Health-Check.

{
    "data": {
        "notes": "Millimetres. ERD = effective rim diameter; offset = hub centre to flange. θ = crosses × 720° ÷ spokes (3-cross 32h = 67.5°). Compute drive and non-drive sides separately — they differ. For gearing or gear inches use a bicycle-gear API.",
        "service": "spokelength-api",
        "endpoints": {
            "GET /v1/meta": "This document.",
            "GET /v1/spoke": "Spoke length(s) from ERD, flange diameter, centre-to-flange offset, spoke count and cross pattern.",
            "GET /v1/bracing": "Bracing angles and side-to-side tension ratio for a dished wheel."
        },
        "description": "Bicycle wheel-building maths: spoke length from hub & rim geometry, bracing angles and dished-wheel tension ratio."
    },
    "meta": {
        "timestamp": "2026-06-06T07:14:02.410Z",
        "request_id": "a39e4b8d-7188-48b6-b18b-2721961b209c"
    },
    "status": "ok",
    "message": "Meta",
    "success": true
}