Roof area, squares & bundles

Code-Snippets

curl "https://api.oanor.com/roofing-api/v1/area" \
  -H "x-oanor-key: oanor_test_..."

await fetch("https://api.oanor.com/roofing-api/v1/area", {
  headers: { "x-oanor-key": "oanor_test_..." }
});

$ch = curl_init("https://api.oanor.com/roofing-api/v1/area");
curl_setopt($ch, CURLOPT_HTTPHEADER, ["x-oanor-key: oanor_test_..."]);
curl_setopt($ch, CURLOPT_RETURNTRANSFER, true);
$out = curl_exec($ch);

import requests
requests.get(
    "https://api.oanor.com/roofing-api/v1/area",
    headers={"x-oanor-key": "oanor_test_..."}
)

Beispiel-Response

Echte Antwort dieses Endpoints, erfasst beim letzten Health-Check.

{
    "data": {
        "note": "Roof area = footprint × slope multiplier. Squares assume 100 ft² each and ~3 shingle bundles per square; pass footprint in ft² for those.",
        "input": {
            "ratio": 0.5,
            "rise_run": "6:12",
            "angle_degrees": 26.565,
            "percent_slope": 50,
            "waste_percent": 10,
            "footprint_area": 1500,
            "slope_multiplier": 1.118034
        },
        "squares": 18.45,
        "roof_area": 1677.051,
        "shingle_bundles": 56,
        "slope_multiplier": 1.118034,
        "roof_area_with_waste": 1844.756
    },
    "meta": {
        "timestamp": "2026-06-03T17:41:55.476Z",
        "request_id": "a27d6793-70d3-454e-92ed-c613cc6b6d17"
    },
    "status": "ok",
    "message": "Roof area",
    "success": true
}