Spec

Code-Snippets

curl "https://api.oanor.com/radiant-api/v1/meta" \
  -H "x-oanor-key: oanor_test_..."

await fetch("https://api.oanor.com/radiant-api/v1/meta", {
  headers: { "x-oanor-key": "oanor_test_..." }
});

$ch = curl_init("https://api.oanor.com/radiant-api/v1/meta");
curl_setopt($ch, CURLOPT_HTTPHEADER, ["x-oanor-key: oanor_test_..."]);
curl_setopt($ch, CURLOPT_RETURNTRANSFER, true);
$out = curl_exec($ch);

import requests
requests.get(
    "https://api.oanor.com/radiant-api/v1/meta",
    headers={"x-oanor-key": "oanor_test_..."}
)

Beispiel-Response

Echte Antwort dieses Endpoints, erfasst beim letzten Health-Check.

{
    "data": {
        "notes": "US units. Output ≈ 2 BTU/hr/ft²/°F (floor−room), floor ≤ 85 °F; tubing = area×12/spacing, loops ≤ 300 ft; flow GPM = load/(500·ΔT). Estimates — verify with a full heat-loss calc. For the building load use an HVAC API; for pipe velocity use a flow-rate API.",
        "service": "radiant-api",
        "endpoints": {
            "GET /v1/flow": "Loop flow rate (GPM) for a heat load at a supply/return ΔT.",
            "GET /v1/meta": "This document.",
            "GET /v1/output": "Heat output of a warm floor from its surface temperature.",
            "GET /v1/tubing": "Tubing length and number of loops for an area at a spacing."
        },
        "description": "Radiant-floor / hydronic heating maths: floor heat output, tubing and loops for an area, and the loop flow rate for a heat load."
    },
    "meta": {
        "timestamp": "2026-06-06T23:53:59.783Z",
        "request_id": "abf0503f-e887-46a5-9a72-934efdb89ea2"
    },
    "status": "ok",
    "message": "Meta",
    "success": true
}