Zum Inhalt springen
GET /v1/meta

Usage notes

Live testen

10 freie Calls pro Tag — keine Anmeldung, kein API-Key. Geht durchs oanor-Gateway.

Eigene Header (optional)
api.oanor.com/opensky-api

Funktioniert. Hol dir einen API-Key und nutze sie in deinem Projekt.

API-Key holen

Code-Snippets

curl "https://api.oanor.com/opensky-api/v1/meta" \
  -H "x-oanor-key: oanor_test_..."
await fetch("https://api.oanor.com/opensky-api/v1/meta", {
  headers: { "x-oanor-key": "oanor_test_..." }
});
$ch = curl_init("https://api.oanor.com/opensky-api/v1/meta");
curl_setopt($ch, CURLOPT_HTTPHEADER, ["x-oanor-key: oanor_test_..."]);
curl_setopt($ch, CURLOPT_RETURNTRANSFER, true);
$out = curl_exec($ch);
import requests
requests.get(
    "https://api.oanor.com/opensky-api/v1/meta",
    headers={"x-oanor-key": "oanor_test_..."}
)

Beispiel-Response

Echte Antwort dieses Endpoints, erfasst beim letzten Health-Check.

{
    "data": {
        "note": "Live air traffic from the OpenSky Network, a community network of ADS-B/Mode-S receivers. /v1/flights?lamin=45.8&lomin=5.9&lamax=47.8&lomax=10.5 = every aircraft currently airborne in a geographic bounding box (keep it under ~20°×30°), each with its ICAO 24-bit address, callsign, origin country, live longitude/latitude, barometric and geometric altitude, ground speed, heading, vertical rate and squawk — a real-time radar snapshot; /v1/aircraft?icao24=4b1815 = a single aircraft's current state by its 6-hex ICAO address; /v1/arrivals?airport=EDDF&hours=2 and /v1/departures?airport=EGLL&hours=2 = the flights that arrived at / departed from an airport (4-letter ICAO code) over the last N hours (1-48), with callsign, the estimated other-end airport and the first/last-seen timestamps. Positions are in degrees, altitudes & speeds in metres / metres-per-second. This is live flight tracking — distinct from aircraft registries, airline directories, airport metadata and scheduled-flight status. Data from the OpenSky Network (free for non-commercial use; please credit OpenSky). Coverage depends on volunteer receiver density.",
        "source": "OpenSky Network — crowd-sourced ADS-B/Mode-S air traffic (opensky-network.org)",
        "endpoints": [
            "/v1/flights",
            "/v1/aircraft",
            "/v1/arrivals",
            "/v1/departures",
            "/v1/meta"
        ]
    },
    "meta": {
        "timestamp": "2026-06-01T16:23:51.195Z",
        "request_id": "8b18b4fa-b705-4de0-89ad-86b68e43eb53"
    },
    "status": "ok",
    "message": "Meta retrieved",
    "success": true
}