Op-Amp Gain API
Operational-amplifier gain and bandwidth maths as an API, computed locally and deterministically. The gain endpoint computes the closed-loop gain of an inverting (Av = −Rf/Rin) or non-inverting (Av = 1 + Rf/Rin) amplifier from the feedback and input resistors, gives the gain in decibels (20·log₁₀|Av|) and the output voltage for an input, and solves the feedback resistor needed for a target gain. The summing endpoint computes the output of an inverting summing (adder) amplifier, Vout = −Rf·Σ(Vi/Ri), from any number of weighted inputs — the basis of analogue mixers and digital-to-analogue converters. The bandwidth endpoint applies the gain-bandwidth product, GBW = closed-loop gain × bandwidth, and solves any of the three (a 1 MHz op-amp at a gain of 10 has a 100 kHz bandwidth), and computes the full-power bandwidth from the slew rate and the peak output voltage, f = slew_rate/(2π·Vpeak). Everything is computed locally and deterministically, so it is instant and private. Ideal for analogue-electronics and circuit-design tools, amplifier, filter and sensor-conditioning design, audio and instrumentation apps, and electronics education. Pure local computation — no key, no third-party service, instant. Live, nothing stored. 3 endpoints. This is op-amp amplifier design; for Ohm's law, reactance and resonance use an Ohm's-law API.
api.oanor.com/opamp-api
