Bearing capacity at the plate

Codefragmenten

curl "https://api.oanor.com/rivet-api/v1/bearing-capacity" \
  -H "x-oanor-key: oanor_test_..."

await fetch("https://api.oanor.com/rivet-api/v1/bearing-capacity", {
  headers: { "x-oanor-key": "oanor_test_..." }
});

$ch = curl_init("https://api.oanor.com/rivet-api/v1/bearing-capacity");
curl_setopt($ch, CURLOPT_HTTPHEADER, ["x-oanor-key: oanor_test_..."]);
curl_setopt($ch, CURLOPT_RETURNTRANSFER, true);
$out = curl_exec($ch);

import requests
requests.get(
    "https://api.oanor.com/rivet-api/v1/bearing-capacity",
    headers={"x-oanor-key": "oanor_test_..."}
)

Voorbeeldrespons

Een echte respons van dit endpoint, vastgelegd bij de laatste health check.

{
    "data": {
        "note": "Bearing (or crushing) capacity is the load the rivet can press against the side of its hole before the plate or rivet crushes: capacity = the projected contact area (diameter × plate thickness) × the bearing strength × the number of rivets. Thin plates fail in bearing long before the rivet shears, which is why bearing must be checked alongside shear; the joint's real strength is the lesser of the two, and edge tear-out is a third check beyond this.",
        "inputs": {
            "rivet_count": 4,
            "rivet_diameter_mm": 6,
            "plate_thickness_mm": 3,
            "bearing_strength_mpa": 440
        },
        "per_rivet_bearing_n": 7920,
        "total_bearing_capacity_n": 31680,
        "total_bearing_capacity_kn": 31.68
    },
    "meta": {
        "timestamp": "2026-06-07T08:17:55.320Z",
        "request_id": "ca4c69c7-6983-4b22-bee5-c3d755fd9822"
    },
    "status": "ok",
    "message": "Bearing capacity",
    "success": true
}