Spec

Codefragmenten

curl "https://api.oanor.com/conveyor-api/v1/meta" \
  -H "x-oanor-key: oanor_test_..."

await fetch("https://api.oanor.com/conveyor-api/v1/meta", {
  headers: { "x-oanor-key": "oanor_test_..." }
});

$ch = curl_init("https://api.oanor.com/conveyor-api/v1/meta");
curl_setopt($ch, CURLOPT_HTTPHEADER, ["x-oanor-key: oanor_test_..."]);
curl_setopt($ch, CURLOPT_RETURNTRANSFER, true);
$out = curl_exec($ch);

import requests
requests.get(
    "https://api.oanor.com/conveyor-api/v1/meta",
    headers={"x-oanor-key": "oanor_test_..."}
)

Voorbeeldrespons

Een echte respons van dit endpoint, vastgelegd bij de laatste health check.

{
    "data": {
        "notes": "Speed in m/s, length and height in m, mass flow in t/h, tension in N. Simplified engineering model — not a full DIN 22101 / CEMA calculation (no idler-spacing, sag or temperature factors).",
        "service": "conveyor-api",
        "formulae": {
            "power": "P = μ·g·(m_load + 2·m_belt + m_idler)·L·v + ṁ·g·H",
            "tension": "Te = P/v,  T1 = Te·e^(μθ)/(e^(μθ)−1),  T2 = T1 − Te",
            "capacity": "Q = A·v·3600 (m³/h),  mass = Q·ρ/1000 (t/h)"
        },
        "endpoints": {
            "GET /v1/meta": "This document.",
            "GET /v1/power": "Drive power from the mass flow, length, lift, belt speed and friction.",
            "GET /v1/tension": "Tight- and slack-side belt tensions from the effective tension and drive wrap.",
            "GET /v1/capacity": "Volumetric (m³/h) and mass (t/h) capacity from belt speed, cross-section (or width) and bulk density."
        },
        "description": "Belt-conveyor design calculator: throughput capacity, drive power (friction + lift) and belt tensions for a troughed belt conveyor."
    },
    "meta": {
        "timestamp": "2026-06-04T18:38:24.419Z",
        "request_id": "d02f4160-269c-4245-8c8e-2ae58d1bcbf4"
    },
    "status": "ok",
    "message": "Meta",
    "success": true
}