oanor
Iscriviti gratis
Mercata Prezzi Caratteristiche Accedi

API · /wiregauge-api

Wire Gauge API

salutare 3,981 Abbonati

AWG (American Wire Gauge) maths as an API, computed locally and deterministically. The awg endpoint returns the physical properties of a gauge — the diameter, 0.127·92^((36−n)/39) mm, the cross-section area, the DC resistance per kilometre and per 1000 ft for copper or aluminium, and the Preece fusing current (the point at which the wire melts, far above any safe operating ampacity). The fromdiameter endpoint goes the other way, giving the nearest AWG for a measured diameter or cross-section area, n = 36 − 39·log₉₂(d/0.127). The resistance endpoint gives the resistance of a wire run from its gauge, length and material, R = ρ·L/A. Gauges 0/0 (1/0), 00 (2/0) and 000 (3/0) are entered as −1, −2 and −3. Everything is computed locally and deterministically, so it is instant and private. Ideal for electronics, electrical and maker app developers, wiring and cable-selection tools, and engineering education. Pure local computation — no key, no third-party service, instant. Live, nothing stored. 3 endpoints. This is wire-gauge geometry and resistance; for cable voltage drop over a circuit use a voltage-drop API.

#wire-gauge #awg #electronics #cable #electrical #developer-tools
api.oanor.com/wiregauge-api
Ottieni una chiave API Prova nel parco giochi → Contatta provider

Specifica leggibile dalle macchine, così gli agenti AI possono integrare questa API.

/api/wiregauge-api/openapi.json
/api/wiregauge-api/llms.txt

Individuazione: GET /api/index.json elenca ogni API.

API salute

salutare
Tempo di attività
100.00%
Sondaggi del server · 24 ore su 24
Latenza media
90 ms
Sondaggi del server · 24 ore su 24
Abbonati
3,981
attiva
Chiamate totali
28
ultimi 7 giorni
status Pagina di stato completa → · 24 sonde/24h

Prezzi

Scegli un livello: fatturazione mensile, annullamento in qualsiasi momento.

Free

Gratis

  • 2,000 chiamate/mese
  • 2 richieste/secondo
  • Tetto rigido (429 sopra la quota, nessuna eccedenza)
  • 24,335 calls/month
  • 2 req/sec
  • AWG props + from-diameter + resistance
  • No credit card
Accedi per abbonarti

Starter

€9.00 /mese

  • 30,000 chiamate/mese
  • 5 richieste/secondo
  • Tetto rigido (429 sopra la quota, nessuna eccedenza)
  • 35.65k llamadas/mes
  • 8 req/seg
  • Cobre/aluminio, corriente de fusión
  • Soporte por correo electrónico
Accedi per abbonarti

Pro

€24.00 /mese

  • 200,000 chiamate/mese
  • 20 richieste/secondo
  • Tetto rigido (429 sopra la quota, nessuna eccedenza)
  • 390.5k calls/month
  • 20 req/sec
  • Wiring & cable-selection pipelines
  • Priority support
Accedi per abbonarti

Mega

€69.00 /mese

  • 1,500,000 chiamate/mese
  • 60 richieste/secondo
  • Tetto rigido (429 sopra la quota, nessuna eccedenza)
  • 1.995M llamadas/mes
  • 50 req/seg
  • Escala de plataforma
  • SLA dedicado
Accedi per abbonarti

Costruito da

P
PremiumApi

Correlato APIs

Altro APIs con tag sovrapposti.

Wire Gauge (AWG) API

American Wire Gauge maths as an API, computed locally and deterministically from the AWG definition. The awg endpoint takes a gauge — an integer, or 0/00/000/0000 (1/0–4/0) — and returns the conductor diameter (millimetres, inches, mils), the cross-section area (mm², kcmil and circular mils), the DC resistance per kilometre and per 1000 feet for copper and aluminium, and a typical ampacity. The convert endpoint finds the nearest standard AWG for a given cross-section area, diameter or kcmil, and also reports the exact non-integer gauge. The voltage-drop endpoint computes the round-trip voltage drop and power loss for a wiring run from the gauge (or area), length, current and conductor material, with the percentage drop and the voltage left at the load. Everything is computed locally and deterministically, so it is instant and private. Resistances are at 20°C; ampacity figures are typical guidance only — real installations are governed by the NEC/IEC tables for the conductor, insulation and conditions. Ideal for electrical and electronics tools, maker and hobby projects, solar and automotive wiring, and AV and installation planning. Pure local computation — no key, no third-party service, instant. Live, nothing stored. 3 endpoints. This is wire-gauge physics; for Ohm's-law voltage/current/resistance use an electronics API and for resistor colour bands use a resistor API.

api.oanor.com/awg-api

Voltage Divider API

Resistive voltage-divider circuit design as an API, computed locally and deterministically. The divide endpoint takes an input voltage and two resistors and returns the output voltage Vout = Vin·R2/(R1+R2), the current I = Vin/(R1+R2) that flows through the chain, and the power dissipated in each resistor and in total — a 12 V source with R1 = 1 kΩ and R2 = 2 kΩ gives 8 V at 4 mA. The loaded endpoint adds a load resistor across R2, computes the parallel combination R2′ = R2·RL/(R2+RL) and the loaded output Vout = Vin·R2′/(R1+R2′), and reports the droop in volts and percent against the unloaded value, the classic mistake when a divider feeds a real load. The resistor endpoint sizes the missing resistor for a target output — R2 = R1·Vout/(Vin−Vout) or R1 = R2·(Vin−Vout)/Vout — so you can pick parts for a reference or sensor-bias point. All quantities are volts, ohms, amps and watts. Everything is computed locally and deterministically, so it is instant and private. Ideal for electronics, embedded, hardware, sensor-interfacing and EE-education app developers, reference-voltage and bias-network tools, and maker software. Pure local computation — no key, no third-party service, instant. Live, nothing stored. 3 endpoints. This is the resistive divider; for a single Ohm’s-law relationship use an Ohm’s-law API and for RC/RL filters an RC-filter API.

api.oanor.com/voltagedivider-api

RC Filter API

First-order RC and RL passive-filter design as an API, computed locally and deterministically. The lowpass and highpass endpoints take a resistor and capacitor (RC) or a resistor and inductor (RL) and return the −3 dB cutoff frequency (fc = 1/(2πRC) for RC, R/(2πL) for RL), the time constant (τ = RC or L/R) and the angular cutoff; pass a frequency as well and they add the magnitude response as a linear gain and in decibels and the phase shift in degrees — a 1 kΩ / 1 µF low-pass has fc ≈ 159.15 Hz, and right at the cutoff the gain is −3.01 dB with −45° phase for a low-pass or +45° for a high-pass. The component endpoint solves the missing one of fc, R and C from the other two (fc = 1/(2πRC)), so you can size a resistor or capacitor for a target cutoff. All quantities are SI: ohms, farads, henries and hertz. Everything is computed locally and deterministically, so it is instant and private. Ideal for electronics, audio, embedded, signal-processing and EE-education app developers, filter-design and circuit-sizing tools, and maker software. Pure local computation — no key, no third-party service, instant. Live, nothing stored. 3 endpoints. This is first-order single-pole filter design; for full RLC impedance and resonance use an impedance API and for stored capacitor energy a capacitor API.

api.oanor.com/rcfilter-api

Chebyshev Filter API

Chebyshev Type I filter-design maths as an API, computed locally and deterministically. The order endpoint computes the minimum filter order to meet a specification, n = ⌈acosh(√((10^(As/10)−1)/(10^(Ap/10)−1))) / acosh(fs/fp)⌉, from the passband edge frequency and its ripple and the stopband edge and its required attenuation — a Chebyshev filter usually needs a lower order than a Butterworth for the same specification, trading a flat passband for equiripple. The response endpoint computes the equiripple magnitude response, |H| = 1/√(1 + ε²·Tₙ²(f/fc)) with the ripple factor ε = √(10^(Ap/10) − 1) and the Chebyshev polynomial Tₙ, in linear and decibel form — in the passband the magnitude ripples between 0 and −Ap dB and reaches exactly −Ap dB at the cutoff, then rolls off faster than a Butterworth. The ripple endpoint converts between the passband ripple in decibels and the ripple factor ε, with the passband maximum and minimum. Frequencies are in hertz, ripple and attenuation in decibels and the order a positive integer. Everything is computed locally and deterministically, so it is instant and private. Ideal for DSP, audio, RF, communications and instrumentation app developers, filter-design and selectivity tools, and signal-processing education. Pure local computation — no key, no third-party service, instant. Live, nothing stored. 3 endpoints. This is the Chebyshev Type I filter; for the maximally-flat Butterworth use a Butterworth API.

api.oanor.com/chebyshev-api

Domande frequenti

Risposte rapide su prezzi, quote e integrazione.

Come ottengo una chiave API per Wire Gauge API?
Registrati gratuitamente su oanor.com, genera una chiave API dalla dashboard sviluppatore e chiama Wire Gauge API con l'header x-oanor-key. Nessuna carta di credito richiesta per il piano gratuito.
Qual è il limite di velocità di Wire Gauge API?
Il piano gratuito consente 1 richiesta al secondo. I piani a pagamento arrivano fino a 50 richieste al secondo nel piano Mega. I limiti rigorosi restituiscono HTTP 429 oltre la quota — nessuna spesa imprevista.
Quanto costa Wire Gauge API?
Wire Gauge API ha un piano gratuito con 100 chiamate / mese. I piani a pagamento partono da €9.00 / mese con quote più alte e limiti di velocità più rapidi.
Posso cancellare l'abbonamento in qualsiasi momento?
Sì. I piani sono fatturati mensilmente e puoi cancellare in qualsiasi momento dalla dashboard di fatturazione. Nessun contratto a lungo termine e nessuna penale di cancellazione.
Wire Gauge API è conforme al GDPR?
Tutte le richieste a Wire Gauge API passano attraverso il nostro gateway in UE. La tua chiave upstream non lascia mai il nostro server e nessun dato personale viene condiviso con il fornitore upstream oltre alla richiesta inviata.

Scegli un endpoint dall'elenco a sinistra per visualizzarne i dettagli e provarlo.

Frammenti di codice

Iscriviti per ottenere una chiave API, quindi chiama qualsiasi percorso sotto il tuo slug.

curl https://api.oanor.com/wiregauge-api/SOME_PATH \
  -H "x-oanor-key: oanor_test_..."
const res = await fetch("https://api.oanor.com/wiregauge-api/SOME_PATH", {
  headers: { "x-oanor-key": "oanor_test_..." }
});
const data = await res.json();
$ch = curl_init("https://api.oanor.com/wiregauge-api/SOME_PATH");
curl_setopt($ch, CURLOPT_RETURNTRANSFER, true);
curl_setopt($ch, CURLOPT_HTTPHEADER, ["x-oanor-key: oanor_test_..."]);
$response = curl_exec($ch);
import requests
r = requests.get(
    "https://api.oanor.com/wiregauge-api/SOME_PATH",
    headers={"x-oanor-key": "oanor_test_..."},
)
print(r.json())

Valutazioni

Accedi per votare.

Nessuna recensione ancora.

Discussione

Fai domande, condividi consigli, ricevi risposte dal provider e dagli altri sviluppatori. Pubblico — chiunque può leggere.

Accedi per scrivere o rispondere.

Accedi

Nuova discussione

/ 4000

📌 Fissato 🔒 Bloccato

·

· ·

/ 4000

🔒 Discussione bloccata — non si può più rispondere.

  • Nessuna discussione — inizia tu.

Supporto

Supporto privato 1:1 con il provider — fatturazione, integrazione, account. Solo tu e il team del provider vedete questi thread.

Accedi per aprire un ticket di supporto.

Accedi

Apri nuovo ticket

Descrivi cosa ti serve. Il team del provider riceve un'email e risponde sulla pagina del ticket.

  • Nessun ticket per questa API.

Abbonamento attivo: le chiamate possono iniziare subito.

Invia la tua prima richiesta —

Abbonamento attivo: copia uno snippet e avvia la tua prima chiamata.