oanor
Iscriviti gratis
Mercata Prezzi Caratteristiche Accedi

API · /uvalue-api

U-Value & R-Value API

salutare 4,531 Abbonati

Building-fabric thermal maths — U-value, R-value and heat loss — as an API, computed locally and deterministically. The rvalue endpoint takes a wall, roof or floor build-up as a list of layers (each given as a thickness and a thermal conductivity, or a thickness and a named material from a built-in table, or a direct R-value) and adds the interior and exterior surface resistances to return the total thermal resistance R = Rsi + ΣR_layer + Rse and the thermal transmittance U = 1/R, in both metric (RSI, m²K/W and W/m²K) and imperial (R-value) units, with a per-layer breakdown. The layer endpoint gives the R-value of a single material from its thickness and conductivity, R = thickness/conductivity, and solves for whichever of the three you leave out, with conductivities for concrete, brick, timber, plasterboard, mineral wool, EPS, XPS, PIR and more. The heatloss endpoint computes the steady-state heat loss through an element, Q = U·A·ΔT, in watts, BTU per hour and kWh per day from a U-value (or R-value), an area and a temperature difference (direct or as indoor minus outdoor), and an annual figure from heating degree days. Everything is computed locally and deterministically, so it is instant and private. Ideal for building-energy and retrofit tools, architecture and construction apps, insulation and SAP/Passivhaus calculators, and energy-assessment software. Pure local computation — no key, no third-party service, instant. Live, nothing stored. 3 endpoints. This is building-fabric thermal performance; for rule-of-thumb HVAC equipment sizing use an HVAC API.

#u-value #r-value #insulation #building-physics #energy #developer-tools
api.oanor.com/uvalue-api
Ottieni una chiave API Prova nel parco giochi → Contatta provider

Specifica leggibile dalle macchine, così gli agenti AI possono integrare questa API.

/api/uvalue-api/openapi.json
/api/uvalue-api/llms.txt

Individuazione: GET /api/index.json elenca ogni API.

API salute

salutare
Tempo di attività
100.00%
Sondaggi del server · 24 ore su 24
Latenza media
93 ms
Sondaggi del server · 24 ore su 24
Abbonati
4,531
attiva
Chiamate totali
36
ultimi 7 giorni
status Pagina di stato completa → · 24 sonde/24h

Prezzi

Scegli un livello: fatturazione mensile, annullamento in qualsiasi momento.

Free

Gratis

  • 2,000 chiamate/mese
  • 2 richieste/secondo
  • Tetto rigido (429 sopra la quota, nessuna eccedenza)
  • 每月17,235次调用
  • 每秒2个请求
  • R值 + 层 + 热损失
  • 无需信用卡
Accedi per abbonarti

Starter

€9.00 /mese

  • 15,000 chiamate/mese
  • 6 richieste/secondo
  • Tetto rigido (429 sopra la quota, nessuna eccedenza)
  • 28.55k calls/month
  • 8 req/sec
  • Material table, metric & imperial
  • Email support
Accedi per abbonarti

Pro

€24.00 /mese

  • 80,000 chiamate/mese
  • 15 richieste/secondo
  • Tetto rigido (429 sopra la quota, nessuna eccedenza)
  • 319.5k calls/month
  • 20 req/sec
  • Retrofit / energy-assessment pipelines
  • Priority support
Accedi per abbonarti

Mega

€69.00 /mese

  • 400,000 chiamate/mese
  • 40 richieste/secondo
  • Tetto rigido (429 sopra la quota, nessuna eccedenza)
  • 1.64M calls/month
  • 50 req/sec
  • Platform scale
  • Dedicated SLA
Accedi per abbonarti

Costruito da

P
PremiumApi

Correlato APIs

Altro APIs con tag sovrapposti.

Propane & LPG Tank API

Propane and LPG tank maths as an API, computed locally and deterministically — the usable-fill, energy and burn-time numbers a homeowner, RV-er, grill-master or HVAC tech works out at the tank. The tank endpoint turns a tank size into real numbers: liquid propane is 4.24 lb per gallon and holds 91,452 BTU per gallon (about 21,569 BTU per pound), so a 20 lb barbecue cylinder carries roughly 4.7 gallons and 431,000 BTU. It knows the two ways tanks are sized — a portable cylinder (20, 30, 40 lb) is rated by the propane weight it holds, while a bulk tank (100, 250, 500, 1000 gal) is filled to only 80 % of its water capacity to leave room for expansion, so a 500-gallon tank actually holds 400 gallons of propane and about 36.6 million BTU. The burntime endpoint divides that energy by an appliance’s BTU-per-hour input rating to give run time: that same 20 lb cylinder runs a 30,000 BTU/hr patio heater about 14 hours, and an optional hours-per-day turns it into days. The refill endpoint costs a fill from a price per gallon, gives the cost per 100,000 BTU so you can compare propane to natural gas or electricity, and — with an appliance rating — the running cost per hour. Everything is computed locally and deterministically, so it is instant and private. Ideal for home-energy, HVAC, RV, off-grid, grilling and outdoor-living app developers, fuel-cost and tank-monitor tools, and propane-delivery calculators. Pure local computation — no key, no third-party service, instant. US units. Live, nothing stored. 3 compute endpoints. For vehicle fuel economy or the ideal gas law use a different API.

api.oanor.com/propane-api

Hydropower API

Hydroelectric-power engineering maths as an API, computed locally and deterministically. The power endpoint computes the electrical power a hydro plant generates with P = ρ·g·Q·H·η, from the water flow rate, the net head (the effective drop), the overall turbine-generator efficiency (typically 0.80–0.92) and the water density, returning both the gross power at 100 % efficiency and the net electrical output. The sizing endpoint inverts the relation to size a scheme — given a target power it solves the flow rate needed at a known head, or the head needed at a known flow, Q = P/(ρ·g·H·η). The annual-energy endpoint computes the yearly energy from the rated power and a capacity factor (typically 0.3–0.6 for hydro, accounting for water availability and downtime), E = P × 8760 h × capacity factor, and an optional revenue from an electricity price. Flow is in cubic metres per second, head in metres, efficiency 0–1, power in watts, kilowatts and megawatts. Everything is computed locally and deterministically, so it is instant and private. Ideal for renewable-energy, micro-hydro, civil-engineering, feasibility and sustainability app developers, run-of-river and reservoir tools, and energy education. Pure local computation — no key, no third-party service, instant. Live, nothing stored. 3 endpoints. This is hydroelectric generation; for wind-turbine power use a wind-power API, for solar resource a solar API and for pump (energy-consuming) duty a pump API.

api.oanor.com/hydropower-api

Capacitor API

Capacitor maths as an API, computed locally and deterministically. The energy endpoint computes the stored energy and charge of a capacitor from any two of the capacitance, the voltage and the charge — E = ½CV² = ½QV and Q = CV — in joules, millijoules and coulombs. The charging endpoint models the RC charging and discharging transient: the time constant τ = RC, the voltage at a given time, V(t) = Vs(1 − e^(−t/RC)) when charging or V(t) = V₀·e^(−t/RC) when discharging, and the percent charged, or — given a target voltage — the time to reach it; a capacitor reaches about 63 % of the way in one time constant and over 99 % in five. The combination endpoint computes the total capacitance of capacitors in series (1/C = Σ1/Cᵢ) or parallel (C = ΣCᵢ). Capacitance accepts farads or the handy µF/nF/pF units. Everything is computed locally and deterministically, so it is instant and private. Ideal for electronics, maker, embedded and circuit-design app developers, power-supply and timing tools, and electronics education. Pure local computation — no key, no third-party service, instant. Live, nothing stored. 3 endpoints. This is capacitor maths; for AC reactance and resonance use a resonance API and for LED resistor sizing an LED-resistor API.

api.oanor.com/capacitor-api

Wind Power API

Wind-turbine power maths as an API, computed locally and deterministically. The power endpoint applies the wind-power equation P = ½ · ρ · A · v³ · Cp: from the wind speed, the rotor (given as swept area, diameter or blade length) and an optional air density and power coefficient, it returns the total power in the wind, the Betz maximum (the theoretical 16/27 ≈ 59.3 % limit) and the power actually extracted at the chosen coefficient — in watts, kilowatts, megawatts and horsepower. The energy endpoint multiplies power by time and an optional capacity factor to give the energy produced in watt-, kilowatt- and megawatt-hours, taking the power directly or deriving it from the wind and rotor. The sweptarea endpoint is a geometry helper: swept area from a diameter, radius or blade length, plus the blade-tip speed and tip-speed ratio from an rpm. Wind speed accepts metres per second, km/h, mph or knots; air density defaults to 1.225 kg/m³ at sea level. Because power scales with the cube of wind speed and the square of rotor diameter, small changes move it a lot — the API shows every intermediate value. Everything is computed locally and deterministically, so it is instant and private. Ideal for renewable-energy and engineering tools, education and physics apps, site-assessment and feasibility calculators, and STEM projects. Pure local computation — no key, no third-party service, instant. Live, nothing stored. 3 endpoints. This is wind-turbine power physics; for the Beaufort wind scale use a wind-scale API and for solar arrays use a solar API.

api.oanor.com/windpower-api

Domande frequenti

Risposte rapide su prezzi, quote e integrazione.

Come ottengo una chiave API per U-Value & R-Value API?
Registrati gratuitamente su oanor.com, genera una chiave API dalla dashboard sviluppatore e chiama U-Value & R-Value API con l'header x-oanor-key. Nessuna carta di credito richiesta per il piano gratuito.
Qual è il limite di velocità di U-Value & R-Value API?
Il piano gratuito consente 1 richiesta al secondo. I piani a pagamento arrivano fino a 50 richieste al secondo nel piano Mega. I limiti rigorosi restituiscono HTTP 429 oltre la quota — nessuna spesa imprevista.
Quanto costa U-Value & R-Value API?
U-Value & R-Value API ha un piano gratuito con 100 chiamate / mese. I piani a pagamento partono da €9.00 / mese con quote più alte e limiti di velocità più rapidi.
Posso cancellare l'abbonamento in qualsiasi momento?
Sì. I piani sono fatturati mensilmente e puoi cancellare in qualsiasi momento dalla dashboard di fatturazione. Nessun contratto a lungo termine e nessuna penale di cancellazione.
U-Value & R-Value API è conforme al GDPR?
Tutte le richieste a U-Value & R-Value API passano attraverso il nostro gateway in UE. La tua chiave upstream non lascia mai il nostro server e nessun dato personale viene condiviso con il fornitore upstream oltre alla richiesta inviata.

Scegli un endpoint dall'elenco a sinistra per visualizzarne i dettagli e provarlo.

Frammenti di codice

Iscriviti per ottenere una chiave API, quindi chiama qualsiasi percorso sotto il tuo slug.

curl https://api.oanor.com/uvalue-api/SOME_PATH \
  -H "x-oanor-key: oanor_test_..."
const res = await fetch("https://api.oanor.com/uvalue-api/SOME_PATH", {
  headers: { "x-oanor-key": "oanor_test_..." }
});
const data = await res.json();
$ch = curl_init("https://api.oanor.com/uvalue-api/SOME_PATH");
curl_setopt($ch, CURLOPT_RETURNTRANSFER, true);
curl_setopt($ch, CURLOPT_HTTPHEADER, ["x-oanor-key: oanor_test_..."]);
$response = curl_exec($ch);
import requests
r = requests.get(
    "https://api.oanor.com/uvalue-api/SOME_PATH",
    headers={"x-oanor-key": "oanor_test_..."},
)
print(r.json())

Valutazioni

Accedi per votare.

Nessuna recensione ancora.

Discussione

Fai domande, condividi consigli, ricevi risposte dal provider e dagli altri sviluppatori. Pubblico — chiunque può leggere.

Accedi per scrivere o rispondere.

Accedi

Nuova discussione

/ 4000

📌 Fissato 🔒 Bloccato

·

· ·

/ 4000

🔒 Discussione bloccata — non si può più rispondere.

  • Nessuna discussione — inizia tu.

Supporto

Supporto privato 1:1 con il provider — fatturazione, integrazione, account. Solo tu e il team del provider vedete questi thread.

Accedi per aprire un ticket di supporto.

Accedi

Apri nuovo ticket

Descrivi cosa ti serve. Il team del provider riceve un'email e risponde sulla pagina del ticket.

  • Nessun ticket per questa API.

Abbonamento attivo: le chiamate possono iniziare subito.

Invia la tua prima richiesta —

Abbonamento attivo: copia uno snippet e avvia la tua prima chiamata.