Tap drill size

Frammenti di codice

curl "https://api.oanor.com/thread-api/v1/tapdrill" \
  -H "x-oanor-key: oanor_test_..."

await fetch("https://api.oanor.com/thread-api/v1/tapdrill", {
  headers: { "x-oanor-key": "oanor_test_..." }
});

$ch = curl_init("https://api.oanor.com/thread-api/v1/tapdrill");
curl_setopt($ch, CURLOPT_HTTPHEADER, ["x-oanor-key: oanor_test_..."]);
curl_setopt($ch, CURLOPT_RETURNTRANSFER, true);
$out = curl_exec($ch);

import requests
requests.get(
    "https://api.oanor.com/thread-api/v1/tapdrill",
    headers={"x-oanor-key": "oanor_test_..."}
)

Risposta di esempio

Una risposta reale di questo endpoint, acquisita dall'ultimo health check.

{
    "data": {
        "note": "Standard metric tap drill = nominal diameter − pitch, giving roughly 75–83% thread. Pass thread_percent for a target engagement.",
        "pitch_mm": 1.5,
        "nominal_diameter": {
            "in": 0.3937,
            "mm": 10,
            "value": 10
        },
        "tap_drill_standard": {
            "in": 0.33465,
            "mm": 8.5,
            "value": 8.5
        },
        "tap_drill_for_percent": {
            "in": 0.33616,
            "mm": 8.5386,
            "value": 8.5386
        },
        "standard_thread_percent": 77,
        "requested_thread_percent": 75
    },
    "meta": {
        "timestamp": "2026-06-04T01:59:07.411Z",
        "request_id": "47c56489-3870-439e-9e3c-0b9f4542e2b0"
    },
    "status": "ok",
    "message": "Tap drill size",
    "success": true
}