oanor
Iscriviti gratis
Mercata Prezzi Caratteristiche Accedi

API · /solarthermal-api

Solar Thermal API

salutare 3,962 Abbonati

Solar-thermal (solar hot water) maths as an API, computed locally and deterministically — the collector, sizing and storage numbers a solar installer or homeowner designs a hot-water system with. The output endpoint gives the useful daily heat a collector makes: area × the daily solar energy on it × the collector efficiency (flat-plate ~40–60 %, evacuated tubes higher), so a 40 ft² collector under 1,800 BTU/ft²/day at 50 % delivers about 36,000 BTU (10.5 kWh) — a family's hot water on a good day. The area endpoint sizes the collector for a demand: area = (daily gallons × 8.34 × the temperature rise) ÷ (irradiance × efficiency), so 60 gallons raised 70 °F needs about 39 ft² — sized for an average day with a backup heater, since a 60–80 % solar fraction is the economic sweet spot. The tank endpoint sizes solar storage at about 1.5 gallons per square foot of collector, big enough to bank a sunny afternoon without stalling the collector. Everything is computed locally and deterministically, so it is instant and private. Ideal for solar-installer and renewable-energy apps, hot-water-system design tools, home-energy calculators, and sustainability sites. Pure local computation — no key, no third-party service, instant. Live, nothing stored. 3 compute endpoints. For the local solar resource use a solar-irradiance API; for pool heating use a pool API.

#solar-thermal #solar-hot-water #renewable #collector #energy #developer-tools
api.oanor.com/solarthermal-api
Ottieni una chiave API Prova nel parco giochi → Contatta provider

Specifica leggibile dalle macchine, così gli agenti AI possono integrare questa API.

/api/solarthermal-api/openapi.json
/api/solarthermal-api/llms.txt

Individuazione: GET /api/index.json elenca ogni API.

API salute

salutare
Tempo di attività
100.00%
Sondaggi del server · 24 ore su 24
Latenza media
88 ms
Sondaggi del server · 24 ore su 24
Abbonati
3,962
attiva
Chiamate totali
12
ultimi 7 giorni
status Pagina di stato completa → · 16 sonde/24h

Prezzi

Scegli un livello: fatturazione mensile, annullamento in qualsiasi momento.

Free

Gratis

  • 510 chiamate/mese
  • 2 richieste/secondo
  • Tetto rigido (429 sopra la quota, nessuna eccedenza)
  • 510 Aufrufe/Monat
  • 2 req/sec
  • Output + area + tank
  • Keine Kreditkarte
Accedi per abbonarti

Starter

€4.95 /mese

  • 13,300 chiamate/mese
  • 6 richieste/secondo
  • Tetto rigido (429 sopra la quota, nessuna eccedenza)
  • 13.300 Aufrufe/Monat
  • 6 req/sec
  • Collector-Sizing
  • E-Mail-Support
Accedi per abbonarti

Pro

€16.70 /mese

  • 83,500 chiamate/mese
  • 15 richieste/secondo
  • Tetto rigido (429 sopra la quota, nessuna eccedenza)
  • 83.500 Aufrufe/Monat
  • 15 req/sec
  • Installer- und Design-Pipelines
  • Prioritäts-Support
Accedi per abbonarti

Mega

€50.20 /mese

  • 268,000 chiamate/mese
  • 36 richieste/secondo
  • Tetto rigido (429 sopra la quota, nessuna eccedenza)
  • 268.000 Aufrufe/Monat
  • 36 req/sec
  • Plattform-Skalierung
  • Dedizierte SLA
Accedi per abbonarti

Costruito da

P
PremiumApi

Correlato APIs

Altro APIs con tag sovrapposti.

Carbon Intensity API

La intensidad de carbono de la red eléctrica de Gran Bretaña como API, del servicio oficial de intensidad de carbono de National Grid ESO. Obtén la intensidad nacional de carbono en vivo en gramos de CO2 por kWh con su índice (muy bajo a muy alto), la combinación de generación actual que muestra exactamente cuánto de la red es gas, eólica, solar, nuclear, biomasa, hidroeléctrica, carbón e importaciones en este momento (con los porcentajes renovables y de carbono cero calculados para ti), la línea de tiempo de intensidad de hoy en intervalos de media hora, la intensidad de carbono de las 18 regiones de GB, la intensidad y la combinación de combustibles para cualquier código postal del Reino Unido, y el factor de emisión de gCO2/kWh de cada tipo de combustible. Estos son exactamente los datos que necesitas para cambiar la carga de vehículos eléctricos, bombas de calor, lavandería y baterías a las medias horas más ecológicas y económicas. Perfecto para aplicaciones de hogar inteligente y energía, programadores de carga de vehículos eléctricos, paneles de sostenibilidad, computación consciente del carbono y herramientas climáticas. Cubre Gran Bretaña. Sin cuentas, sin clave upstream.

api.oanor.com/carbonintensity-api

Battery Pack API

Battery-Pack-Design-Mathematik als API, lokal und deterministisch berechnet – die Spannungs-, Kapazitäts-, Energie-, Strom- und Ladezeit-Zahlen, die ein EV-, E-Bike-, Solar- oder Robotik-Pack-Bauer für eine Batterie aufstellt. Der Konfigurations-Endpunkt wandelt eine Serien-Parallel-Zellenanordnung in das Pack um: Zellen in Reihe addieren ihre Spannungen (die Serienanzahl bestimmt die Packspannung) und Zellen parallel addieren ihre Amperestunden (die Parallelanzahl bestimmt die Kapazität), wobei die Energie in Wattstunden = Spannung × Kapazität – ein 13S4P-Pack aus 3,6 V / 3,5 Ah Zellen ergibt 46,8 V, 14 Ah und etwa 655 Wh aus 52 Zellen, und es meldet auch die Vollladespannung (Serie × 4,2 V für Li-Ion) zur Dimensionierung des Ladegeräts und BMS. Der C-Rate-Endpunkt bezieht Strom auf Kapazität in beide Richtungen – geben Sie eine C-Rate ein, um den Strom zu erhalten, oder einen Strom, um die C-Rate zu erhalten – weil 1C die gesamte Kapazität in einer Stunde lädt oder entlädt, also ein 14-Ah-Pack bei 2C 28 A ergibt, und es gibt die Leistung zurück, wenn Sie die Packspannung übergeben. Der Ladezeit-Endpunkt gibt die Zeit zum Laden zwischen zwei Ladezuständen aus dem Ladestrom an. Alles wird lokal und deterministisch berechnet, daher ist es sofort und privat. Ideal für EV- und E-Bike-Bauer, Solar- und Off-Grid-Speicherwerkzeuge, Robotik- und Drohnen-Packs sowie Batterie-Engineering-Apps. Reine lokale Berechnung – kein Key, kein Drittanbieter-Dienst, sofort. Pack-Design-Schätzungen – echte Zellen verjüngen sich beim Laden und sinken unter Last. 3 Berechnungs-Endpunkte. Für die Laufzeit unter Last verwenden Sie eine Battery-API; für EV-Ladung eine EV-Charging-API.

api.oanor.com/batterypack-api

Heat Pump COP API

Heat-pump and refrigeration performance maths as an API, computed locally and deterministically — the efficiency numbers an HVAC engineer, energy auditor or heat-pump installer actually works with. The cop endpoint gives the coefficient of performance and the US EER rating from the thermal capacity and the electrical power: a unit moving 7 kW of heat on 2 kW of electricity has a COP of 3.5 (an EER of 12), meaning 3.5 units of heating or cooling for every unit of electricity — which is why a heat pump beats resistance heating, where the COP is exactly 1. The carnot endpoint gives the unbeatable ideal limit set only by the absolute temperatures — heating = Th ÷ (Th − Tc), cooling = Tc ÷ (Th − Tc) in kelvin, where heating COP always equals cooling COP plus one — and, given a real COP, the second-law efficiency that says how close the machine runs to that ceiling; the smaller the temperature lift, the higher the limit, which is why ground-source and low-temperature systems beat air-source on a cold day. The capacity endpoint turns electrical power and a COP into the delivered heating or cooling in kilowatts, BTU per hour and tons of refrigeration — the extra energy over the electricity is pulled from the outside air, ground or water. Everything is computed locally and deterministically, so it is instant and private. Ideal for HVAC and refrigeration engineers, energy auditors, heat-pump and building-performance tools, and sustainability dashboards. Pure local computation — no key, no third-party service, instant. Estimates at the stated conditions — real COP falls as the temperature lift rises. 3 compute endpoints. For room sizing use an HVAC BTU API; for moist-air properties use a psychrometric API.

api.oanor.com/heatpump-api

Steam Boiler API

Steam-boiler engineering maths as an API, computed locally and deterministically — the three numbers a boiler operator, plant engineer or steam-system designer actually works with. The boiler-hp endpoint converts a required heat output into boiler horsepower (heat ÷ 33,475 BTU/hr, the standard definition), the equivalent steam output in pounds per hour "from and at" 212 °F (34.5 lb/hr per BHP) and the output in kilowatts — a 1,000,000 BTU/hr load is about 29.9 BHP or 1,031 lb/hr of steam. The factor-of-evaporation endpoint gives the real capacity for your feedwater: the factor = (the total heat of the steam − the feedwater heat) ÷ 970.3, always greater than one because the boiler must add the sensible heat to bring water up to boiling, so a boiler rated "from and at" 212 °F actually makes less with 60 °F feedwater — which is exactly why preheating feedwater with an economiser raises capacity and saves fuel. The blowdown endpoint gives the continuous blowdown rate to hold the boiler water within its dissolved-solids limit: blowdown = steam × feedwater TDS ÷ (boiler limit − feedwater TDS), with the cycles of concentration and the blowdown as a percentage of feedwater — better feedwater means more cycles, less blowdown and less wasted hot water. Everything is computed locally and deterministically, so it is instant and private. Ideal for boiler operators, steam-plant and HVAC engineers, energy auditors, water-treatment specialists and process-engineering tools. Pure local computation — no key, no third-party service, instant. Engineering estimates — verify against the manufacturer data and local code. 3 compute endpoints. For moist-air properties use a psychrometric API; for compressed air use a compressor API.

api.oanor.com/boiler-api

Domande frequenti

Risposte rapide su prezzi, quote e integrazione.

Come ottengo una chiave API per Solar Thermal API?
Registrati gratuitamente su oanor.com, genera una chiave API dalla dashboard sviluppatore e chiama Solar Thermal API con l'header x-oanor-key. Nessuna carta di credito richiesta per il piano gratuito.
Qual è il limite di velocità di Solar Thermal API?
Il piano gratuito consente 1 richiesta al secondo. I piani a pagamento arrivano fino a 50 richieste al secondo nel piano Mega. I limiti rigorosi restituiscono HTTP 429 oltre la quota — nessuna spesa imprevista.
Quanto costa Solar Thermal API?
Solar Thermal API ha un piano gratuito con 100 chiamate / mese. I piani a pagamento partono da €4.95 / mese con quote più alte e limiti di velocità più rapidi.
Posso cancellare l'abbonamento in qualsiasi momento?
Sì. I piani sono fatturati mensilmente e puoi cancellare in qualsiasi momento dalla dashboard di fatturazione. Nessun contratto a lungo termine e nessuna penale di cancellazione.
Solar Thermal API è conforme al GDPR?
Tutte le richieste a Solar Thermal API passano attraverso il nostro gateway in UE. La tua chiave upstream non lascia mai il nostro server e nessun dato personale viene condiviso con il fornitore upstream oltre alla richiesta inviata.

Scegli un endpoint dall'elenco a sinistra per visualizzarne i dettagli e provarlo.

Frammenti di codice

Iscriviti per ottenere una chiave API, quindi chiama qualsiasi percorso sotto il tuo slug.

curl https://api.oanor.com/solarthermal-api/SOME_PATH \
  -H "x-oanor-key: oanor_test_..."
const res = await fetch("https://api.oanor.com/solarthermal-api/SOME_PATH", {
  headers: { "x-oanor-key": "oanor_test_..." }
});
const data = await res.json();
$ch = curl_init("https://api.oanor.com/solarthermal-api/SOME_PATH");
curl_setopt($ch, CURLOPT_RETURNTRANSFER, true);
curl_setopt($ch, CURLOPT_HTTPHEADER, ["x-oanor-key: oanor_test_..."]);
$response = curl_exec($ch);
import requests
r = requests.get(
    "https://api.oanor.com/solarthermal-api/SOME_PATH",
    headers={"x-oanor-key": "oanor_test_..."},
)
print(r.json())

Valutazioni

Accedi per votare.

Nessuna recensione ancora.

Discussione

Fai domande, condividi consigli, ricevi risposte dal provider e dagli altri sviluppatori. Pubblico — chiunque può leggere.

Accedi per scrivere o rispondere.

Accedi

Nuova discussione

/ 4000

📌 Fissato 🔒 Bloccato

·

· ·

/ 4000

🔒 Discussione bloccata — non si può più rispondere.

  • Nessuna discussione — inizia tu.

Supporto

Supporto privato 1:1 con il provider — fatturazione, integrazione, account. Solo tu e il team del provider vedete questi thread.

Accedi per aprire un ticket di supporto.

Accedi

Apri nuovo ticket

Descrivi cosa ti serve. Il team del provider riceve un'email e risponde sulla pagina del ticket.

  • Nessun ticket per questa API.

Abbonamento attivo: le chiamate possono iniziare subito.

Invia la tua prima richiesta —

Abbonamento attivo: copia uno snippet e avvia la tua prima chiamata.