oanor
Iscriviti gratis
Mercata Prezzi Caratteristiche Accedi

API · /flooring-api

Flooring & Tile API

salutare 4,281 Abbonati

Flooring and tiling material-estimation maths as an API, computed locally and deterministically. The tile endpoint computes how many tiles a floor needs — the floor area (given directly or as length × width) divided by the tile area, with a waste allowance for cuts and breakage (10 % by default) — and, given the tiles per box, how many boxes to buy. The packs endpoint sizes laminate, vinyl or carpet from the coverage printed on each pack: packs = ceil(area·(1+waste) / coverage per pack), with the total coverage supplied. The grout endpoint estimates the grout in kilograms for a tiled area from the tile size, the joint width and the tile thickness, ((A+B)/(A·B))·joint·thickness·density per square metre. Everything is computed locally and deterministically, so it is instant and private. Ideal for home-improvement, renovation and trade app developers, DIY and material-ordering tools, and builder and retailer calculators. Pure local computation — no key, no third-party service, instant. Live, nothing stored. 3 endpoints. This is floor-covering estimation; for wall paint use a paint API, for roofing use a roofing API and for concrete use a concrete API.

#flooring #tile #grout #home-improvement #construction #developer-tools
api.oanor.com/flooring-api
Ottieni una chiave API Prova nel parco giochi → Contatta provider

Specifica leggibile dalle macchine, così gli agenti AI possono integrare questa API.

/api/flooring-api/openapi.json
/api/flooring-api/llms.txt

Individuazione: GET /api/index.json elenca ogni API.

API salute

salutare
Tempo di attività
100.00%
Sondaggi del server · 24 ore su 24
Latenza media
91 ms
Sondaggi del server · 24 ore su 24
Abbonati
4,281
attiva
Chiamate totali
32
ultimi 7 giorni
status Pagina di stato completa → · 20 sonde/24h

Prezzi

Scegli un livello: fatturazione mensile, annullamento in qualsiasi momento.

Free

Gratis

  • 2,000 chiamate/mese
  • 2 richieste/secondo
  • Tetto rigido (429 sopra la quota, nessuna eccedenza)
  • 23,235 llamadas/mes
  • 2 req/seg
  • Azulejos + paquetes + lechada
  • Sin tarjeta de crédito
Accedi per abbonarti

Starter

€5.00 /mese

  • 20,000 chiamate/mese
  • 5 richieste/secondo
  • Tetto rigido (429 sopra la quota, nessuna eccedenza)
  • 34.55k llamadas/mes
  • 8 req/seg
  • Recuento de cajas, desperdicio, estimación de lechada
  • Soporte por correo electrónico
Accedi per abbonarti

Pro

€14.00 /mese

  • 120,000 chiamate/mese
  • 15 richieste/secondo
  • Tetto rigido (429 sopra la quota, nessuna eccedenza)
  • 379.5k calls/month
  • 20 req/sec
  • Renovation & estimating pipelines
  • Priority support
Accedi per abbonarti

Mega

€44.00 /mese

  • 600,000 chiamate/mese
  • 40 richieste/secondo
  • Tetto rigido (429 sopra la quota, nessuna eccedenza)
  • 1.94M calls/month
  • 50 req/sec
  • Platform scale
  • Dedicated SLA
Accedi per abbonarti

Costruito da

P
PremiumApi

Correlato APIs

Altro APIs con tag sovrapposti.

Construction Calculator API

Construction and material estimating as an API — the everyday "how much do I need to buy" maths for building and renovation jobs, computed locally and deterministically from standard geometry and trade rules of thumb. The paint endpoint works out the litres and number of cans for a surface, allowing for the number of coats and the paint's coverage and deducting doors and windows. The tile endpoint computes how many tiles (and full boxes) a floor or wall area needs from the tile dimensions and a wastage allowance. The concrete endpoint gives the concrete volume in cubic metres, cubic yards and litres — and the number of pre-mix bags — for a slab, footing, wall or round column, with an optional batch quantity. The bricks endpoint computes how many bricks a wall needs from the brick size and mortar joint (default 215×65 mm brick with a 10 mm joint ≈ 60 bricks per square metre). Everything is computed locally and deterministically, so it is instant and private. Ideal for builders' merchants and trade apps, DIY and home-improvement tools, quoting and estimating software, and project planners. Pure local computation — no key, no third-party service, instant. Live, nothing stored. Estimates are guidance — allow for site conditions and follow the manufacturer's stated figures. 4 endpoints. This is materials estimating; for plain unit conversion use a unit-conversion API and for tyre or drivetrain maths use a tyre API.

api.oanor.com/buildcalc-api

Deck Builder API

Deck-building maths as an API, computed locally and deterministically — the board, joist and fastener counts a homeowner or contractor needs to material out a rectangular deck. The boards endpoint turns the deck size into a real shopping list: rows = deck width ÷ (board width + gap), rounded up, so a 16 ft × 12 ft deck with a 5.5-inch board face (a 5/4×6) and a 1/8-inch gap needs 26 rows; boards run the length, each row takes one 16 ft board, and a 10 % waste allowance brings it to 29 boards plus the linear footage and the deck area. The joists endpoint frames it: joists are spaced along the length, so count = ⌊length ÷ spacing⌋ + 1 — thirteen joists at 16-inch on-center (seventeen at 12-inch for stronger or diagonal decking), each spanning the width, plus two rim joists and a ledger as total framing linear feet. The fasteners endpoint counts the screws: every decking row crosses every joist once and is fastened with two face screws there, so a 16×12 deck takes 26 × 13 × 2 = 676 screws, about 744 with waste — or one hidden clip per intersection. Everything is computed locally and deterministically, so it is instant and private. Ideal for construction, contractor, home-improvement, building-materials and renovation app developers, deck-estimator and takeoff tools, and lumber-yard calculators. Pure local computation — no key, no third-party service, instant. US units (feet/inches). Live, nothing stored. 3 compute endpoints. Rectangular decks; for indoor floor area use a flooring API.

api.oanor.com/deck-api

Caulk Coverage API

Caulk and sealant coverage maths as an API, computed locally and deterministically — the linear-feet-per-tube and how-many-tubes numbers a builder, glazier or DIYer buys sealant by. A bead of caulk is essentially a thin cylinder, so the coverage endpoint works out the feet a cartridge lays from the bead width: volume per foot ≈ (π/4 × width²) × 12 inches, and a standard 10.1 fl oz cartridge (18.2 in³) lays about 30 feet of a quarter-inch bead, 13 feet of a fat three-eighths or 55 of a fine three-sixteenths — pass cartridge_oz for sausage packs or 28-oz tubes, and a tube count to total it. The tubes endpoint runs it backwards: cartridges needed = (joint length × a waste factor) ÷ feet per cartridge, rounded up, so a 100-foot run of quarter-inch bead with 10 % waste takes four tubes. Everything is computed locally and deterministically, so it is instant and private. Ideal for construction, glazing, weatherproofing and home-improvement app developers, material-estimator and shopping-list tools, and contractor software. Pure local computation — no key, no third-party service, instant. Inches and feet; estimates — tooling and waste vary. Live, nothing stored. 2 compute endpoints.

api.oanor.com/caulk-api

ADA Ramp API

ADA wheelchair-ramp maths as an API, computed locally and deterministically — the run, landing and slope numbers a builder or accessibility planner sizes a ramp by. The rule the ADA fixes is 1 inch of rise per 12 of run, a maximum 8.33 % slope, so the ramp endpoint turns a rise into the ramp: run = rise × 12 (or × 16 / × 20 for a gentler grade if you have the room), plus the level landings the code requires — a 5-foot landing top and bottom and another between runs whenever the rise exceeds 30 inches — and the total length end to end, so a 24-inch rise needs a 24-foot run and 34 feet overall, while a 36-inch rise breaks into two runs with an intermediate landing for 51 feet. The fit endpoint answers the real-world question: does a ramp for this rise fit the run you have? It returns the minimum run an ADA 1:12 ramp needs, whether your space is enough, and the slope you would actually get if you forced it in — flagging when that exceeds 8.33 % and you need a switchback or a lower rise. Everything is computed locally and deterministically, so it is instant and private. Ideal for construction, accessibility, home-modification and contractor app developers, ramp-estimator and code-check tools, and building software. Pure local computation — no key, no third-party service, instant. Confirm against current ADA and local code. Live, nothing stored. 2 compute endpoints.

api.oanor.com/adaramp-api

Domande frequenti

Risposte rapide su prezzi, quote e integrazione.

Come ottengo una chiave API per Flooring & Tile API?
Registrati gratuitamente su oanor.com, genera una chiave API dalla dashboard sviluppatore e chiama Flooring & Tile API con l'header x-oanor-key. Nessuna carta di credito richiesta per il piano gratuito.
Qual è il limite di velocità di Flooring & Tile API?
Il piano gratuito consente 1 richiesta al secondo. I piani a pagamento arrivano fino a 50 richieste al secondo nel piano Mega. I limiti rigorosi restituiscono HTTP 429 oltre la quota — nessuna spesa imprevista.
Quanto costa Flooring & Tile API?
Flooring & Tile API ha un piano gratuito con 100 chiamate / mese. I piani a pagamento partono da €5.00 / mese con quote più alte e limiti di velocità più rapidi.
Posso cancellare l'abbonamento in qualsiasi momento?
Sì. I piani sono fatturati mensilmente e puoi cancellare in qualsiasi momento dalla dashboard di fatturazione. Nessun contratto a lungo termine e nessuna penale di cancellazione.
Flooring & Tile API è conforme al GDPR?
Tutte le richieste a Flooring & Tile API passano attraverso il nostro gateway in UE. La tua chiave upstream non lascia mai il nostro server e nessun dato personale viene condiviso con il fornitore upstream oltre alla richiesta inviata.

Scegli un endpoint dall'elenco a sinistra per visualizzarne i dettagli e provarlo.

Frammenti di codice

Iscriviti per ottenere una chiave API, quindi chiama qualsiasi percorso sotto il tuo slug.

curl https://api.oanor.com/flooring-api/SOME_PATH \
  -H "x-oanor-key: oanor_test_..."
const res = await fetch("https://api.oanor.com/flooring-api/SOME_PATH", {
  headers: { "x-oanor-key": "oanor_test_..." }
});
const data = await res.json();
$ch = curl_init("https://api.oanor.com/flooring-api/SOME_PATH");
curl_setopt($ch, CURLOPT_RETURNTRANSFER, true);
curl_setopt($ch, CURLOPT_HTTPHEADER, ["x-oanor-key: oanor_test_..."]);
$response = curl_exec($ch);
import requests
r = requests.get(
    "https://api.oanor.com/flooring-api/SOME_PATH",
    headers={"x-oanor-key": "oanor_test_..."},
)
print(r.json())

Valutazioni

Accedi per votare.

Nessuna recensione ancora.

Discussione

Fai domande, condividi consigli, ricevi risposte dal provider e dagli altri sviluppatori. Pubblico — chiunque può leggere.

Accedi per scrivere o rispondere.

Accedi

Nuova discussione

/ 4000

📌 Fissato 🔒 Bloccato

·

· ·

/ 4000

🔒 Discussione bloccata — non si può più rispondere.

  • Nessuna discussione — inizia tu.

Supporto

Supporto privato 1:1 con il provider — fatturazione, integrazione, account. Solo tu e il team del provider vedete questi thread.

Accedi per aprire un ticket di supporto.

Accedi

Apri nuovo ticket

Descrivi cosa ti serve. Il team del provider riceve un'email e risponde sulla pagina del ticket.

  • Nessun ticket per questa API.

Abbonamento attivo: le chiamate possono iniziare subito.

Invia la tua prima richiesta —

Abbonamento attivo: copia uno snippet e avvia la tua prima chiamata.