Shrink-fit assembly temperature

Fragmentos de código

curl "https://api.oanor.com/pressfit-api/v1/assembly-temperature" \
  -H "x-oanor-key: oanor_test_..."

await fetch("https://api.oanor.com/pressfit-api/v1/assembly-temperature", {
  headers: { "x-oanor-key": "oanor_test_..." }
});

$ch = curl_init("https://api.oanor.com/pressfit-api/v1/assembly-temperature");
curl_setopt($ch, CURLOPT_HTTPHEADER, ["x-oanor-key: oanor_test_..."]);
curl_setopt($ch, CURLOPT_RETURNTRANSFER, true);
$out = curl_exec($ch);

import requests
requests.get(
    "https://api.oanor.com/pressfit-api/v1/assembly-temperature",
    headers={"x-oanor-key": "oanor_test_..."}
)

Respuesta de ejemplo

Una respuesta real de este endpoint, capturada en la última comprobación de estado.

{
    "data": {
        "note": "Heat the hub (or chill the shaft) so it expands past the interference plus a little assembly clearance, then it slides on freely and grips as it returns to temperature: ΔT = (interference + clearance) ÷ (α · diameter). Steel α ≈ 11.7×10⁻⁶/K. Heating the hub is usual (an oven or induction); chilling the shaft with dry ice or liquid nitrogen suits delicate or already-assembled parts. Mind material temper limits when heating.",
        "inputs": {
            "alpha_per_k": 1.17e-5,
            "shaft_dia_mm": 50,
            "start_temp_c": 20,
            "interference_mm": 0.05,
            "assembly_clearance_mm": 0.02
        },
        "required_delta_t_c": 119.7,
        "hub_heating_target_c": 139.7,
        "shaft_cooling_target_c": -99.7
    },
    "meta": {
        "timestamp": "2026-06-06T23:53:53.549Z",
        "request_id": "96b17e72-4eed-4f2a-a55a-e1b3a4ba5b6b"
    },
    "status": "ok",
    "message": "Assembly temperature",
    "success": true
}