Oversize pattern dimension

Fragmentos de código

curl "https://api.oanor.com/casting-api/v1/pattern-shrinkage" \
  -H "x-oanor-key: oanor_test_..."

await fetch("https://api.oanor.com/casting-api/v1/pattern-shrinkage", {
  headers: { "x-oanor-key": "oanor_test_..." }
});

$ch = curl_init("https://api.oanor.com/casting-api/v1/pattern-shrinkage");
curl_setopt($ch, CURLOPT_HTTPHEADER, ["x-oanor-key: oanor_test_..."]);
curl_setopt($ch, CURLOPT_RETURNTRANSFER, true);
$out = curl_exec($ch);

import requests
requests.get(
    "https://api.oanor.com/casting-api/v1/pattern-shrinkage",
    headers={"x-oanor-key": "oanor_test_..."}
)

Respuesta de ejemplo

Una respuesta real de este endpoint, capturada en la última comprobación de estado.

{
    "data": {
        "note": "Metal shrinks as it cools from freezing to room temperature, so the pattern must be made oversize: pattern = casting dimension × (1 + shrinkage/100). The patternmaker's 'contraction rule' bakes this in — about 1.0–1.6 % for grey iron, ~2 % for steel and aluminium, ~1.5 % for brass. A 100 mm steel feature needs a 102 mm pattern. This is solid (linear) contraction only; liquid and freezing shrinkage are fed by the risers.",
        "inputs": {
            "shrinkage_pct": 2,
            "casting_dimension_mm": 100
        },
        "allowance_mm": 2,
        "pattern_dimension_mm": 102
    },
    "meta": {
        "timestamp": "2026-06-07T08:17:50.321Z",
        "request_id": "c9dbd87f-de1d-419a-ac89-1913d5e6f10e"
    },
    "status": "ok",
    "message": "Pattern shrinkage",
    "success": true
}