Floor heat output

Code snippets

curl "https://api.oanor.com/radiant-api/v1/output" \
  -H "x-oanor-key: oanor_test_..."

await fetch("https://api.oanor.com/radiant-api/v1/output", {
  headers: { "x-oanor-key": "oanor_test_..." }
});

$ch = curl_init("https://api.oanor.com/radiant-api/v1/output");
curl_setopt($ch, CURLOPT_HTTPHEADER, ["x-oanor-key: oanor_test_..."]);
curl_setopt($ch, CURLOPT_RETURNTRANSFER, true);
$out = curl_exec($ch);

import requests
requests.get(
    "https://api.oanor.com/radiant-api/v1/output",
    headers={"x-oanor-key": "oanor_test_..."}
)

Example response

A real response from this endpoint, captured by the latest health check.

{
    "data": {
        "note": "A radiant floor gives off roughly 2 BTU/hr per square foot for every °F the floor surface is above the room. Comfort caps the floor at about 85 °F, so the practical ceiling is ~30 BTU/hr/ft² in a 70 °F room — enough for a well-insulated house but not a draughty one, which may need supplemental heat.",
        "inputs": {
            "area_sqft": 300,
            "room_temp_f": 70,
            "floor_temp_f": 85
        },
        "output_btu_hr_sqft": 30,
        "total_output_btu_hr": 9000
    },
    "meta": {
        "timestamp": "2026-06-06T23:53:59.594Z",
        "request_id": "337e36f7-0683-4236-8500-2bad4eb3c97a"
    },
    "status": "ok",
    "message": "Floor output",
    "success": true
}