Spec

Code snippets

curl "https://api.oanor.com/framing-api/v1/meta" \
  -H "x-oanor-key: oanor_test_..."

await fetch("https://api.oanor.com/framing-api/v1/meta", {
  headers: { "x-oanor-key": "oanor_test_..." }
});

$ch = curl_init("https://api.oanor.com/framing-api/v1/meta");
curl_setopt($ch, CURLOPT_HTTPHEADER, ["x-oanor-key: oanor_test_..."]);
curl_setopt($ch, CURLOPT_RETURNTRANSFER, true);
$out = curl_exec($ch);

import requests
requests.get(
    "https://api.oanor.com/framing-api/v1/meta",
    headers={"x-oanor-key": "oanor_test_..."}
)

Example response

A real response from this endpoint, captured by the latest health check.

{
    "data": {
        "notes": "Imperial inches. Mat overlaps the art ~0.25\" each edge; borders default 2\" (use a heavier bottom for a weighted mat). Moulding adds 8× the moulding width for the corners. A planning aid.",
        "service": "framing-api",
        "endpoints": {
            "GET /v1/mat": "Mat window (over the art) and outer mat size from the artwork and border widths.",
            "GET /v1/meta": "This document.",
            "GET /v1/moulding": "Frame moulding length needed, including the 45° mitre allowance."
        },
        "description": "Picture-framing maths: mat board window & outer size, and frame moulding length with mitre allowance."
    },
    "meta": {
        "timestamp": "2026-06-06T07:14:09.573Z",
        "request_id": "e826dd06-7c8c-4d6b-8872-53fab3a9e5ed"
    },
    "status": "ok",
    "message": "Meta",
    "success": true
}