oanor
Sign up free
Marketplace Pricing Features Sign in

API · /batterypack-api

Battery Pack API

healthy 3,638 Subscribers

Battery-pack design maths as an API, computed locally and deterministically — the voltage, capacity, energy, current and charge-time numbers an EV, e-bike, solar or robotics pack builder lays out a battery with. The configuration endpoint turns a series-parallel cell layout into the pack: cells in series add their voltages (the series count sets the pack voltage) and cells in parallel add their amp-hours (the parallel count sets the capacity), with the energy in watt-hours = voltage × capacity — a 13S4P pack of 3.6 V / 3.5 Ah cells is 46.8 V, 14 Ah and about 655 Wh from 52 cells, and it also reports the full-charge voltage (series × 4.2 V for Li-ion) to size the charger and BMS. The c-rate endpoint relates current to capacity both ways — give a C-rate to get the current, or a current to get the C-rate — because 1C draws or charges the whole capacity in an hour, so a 14 Ah pack at 2C is 28 A, and it returns the power if you pass the pack voltage. The charge-time endpoint gives the time to charge between two states of charge from the charge current. Everything is computed locally and deterministically, so it is instant and private. Ideal for EV and e-bike builders, solar and off-grid storage tools, robotics and drone packs, and battery-engineering apps. Pure local computation — no key, no third-party service, instant. Pack-design estimates — real cells taper on charge and sag under load. 3 compute endpoints. For runtime under a load use a battery API; for EV charging an EV-charging API.

#battery #pack #lithium #ev #energy #developer-tools
api.oanor.com/batterypack-api
Get an API key Try in playground → Contact provider

Machine-readable spec so AI agents can integrate this API.

/api/batterypack-api/openapi.json
/api/batterypack-api/llms.txt

Discovery: GET /api/index.json lists every API.

API health

healthy
Uptime
100.00%
Server probes · 24h
Avg latency
83 ms
Server probes · 24h
Subscribers
3,638
active
Total calls
4
last 7 days
status Full status page → · 8 probes/24h

Pricing

Pick a tier — billed monthly, cancel anytime.

Free

Free

  • 6,900 calls / month
  • 2 requests / second
  • Hard cap (429 above quota, no overage)
  • 6,900 calls/month
  • 2 req/sec
  • Configuration + C-rate + charge time
  • No credit card
Sign in to subscribe

Starter

€9.40 /month

  • 73,000 calls / month
  • 6 requests / second
  • Hard cap (429 above quota, no overage)
  • 73,000 calls/month
  • 6 req/sec
  • Energy, power & full-charge voltage
  • Email support
Sign in to subscribe

Pro

€30.50 /month

  • 305,000 calls / month
  • 15 requests / second
  • Hard cap (429 above quota, no overage)
  • 305,000 calls/month
  • 15 req/sec
  • EV/e-bike & storage-design pipelines
  • Priority support
Sign in to subscribe

Mega

€94.00 /month

  • 1,460,000 calls / month
  • 40 requests / second
  • Hard cap (429 above quota, no overage)
  • 1,460,000 calls/month
  • 40 req/sec
  • Platform & OEM scale
  • Dedicated SLA
Sign in to subscribe

Built by

P
PremiumApi

Related APIs

Other APIs with overlapping tags.

Off-Grid Solar Sizing API

Off-grid solar system-sizing maths as an API, computed locally and deterministically — the battery-bank, solar-array and charge-controller numbers an RV, cabin, boat or off-grid homeowner sizes a system with. The battery-bank endpoint gives the storage you need = (daily load × days of autonomy) ÷ (depth of discharge × round-trip efficiency), then ÷ the system voltage for amp-hours: the autonomy carries you through cloudy days and the depth-of-discharge limit protects the cells (lead-acid ~50 %, lithium 80–100 %, which is why lithium banks run smaller), so a 2 kWh/day load at 12 V with 2 days autonomy, 50 % DoD and 85 % efficiency needs about 785 Ah. The array endpoint gives the panels = daily energy ÷ (peak sun hours × system efficiency), where peak sun hours is the day's irradiance as equivalent full-sun hours (~3–6 by place and season) and the efficiency rolls up controller, wiring, heat and dust losses — about 670 W for that load at 4 sun hours and 75 %. The charge-controller endpoint sizes the controller = array watts ÷ battery voltage × a 1.25 safety factor, so a 700 W array on a 12 V bank wants roughly an 80 A controller. Everything is computed locally and deterministically, so it is instant and private. Ideal for solar-installer and DIY tools, RV/marine/cabin power planners, and renewable-energy calculators. Pure local computation — no key, no third-party service, instant. Size for the worst month. 3 compute endpoints. For solar irradiance and sun hours use a solar API; for battery runtime under load a battery API.

api.oanor.com/offgrid-api

Battery Calculator API

Battery and accumulator maths as an API, computed locally and deterministically from basic electrical relationships. The runtime endpoint estimates how long a battery will last under a given load — from the capacity (in mAh, Ah or Wh) and the load (in watts, or amps at a voltage), with adjustable depth-of-discharge and conversion efficiency — and reports the usable energy and the runtime in hours and minutes. The capacity endpoint converts a battery capacity between milliamp-hours, amp-hours, watt-hours, kilowatt-hours and joules at a given voltage. The pack endpoint builds a series/parallel cell pack (for example 3S2P): it returns the pack voltage, capacity and energy and the total cell count — series adds voltage, parallel adds capacity. The charge endpoint estimates the charge time from the capacity and the charge current (or a C-rate), with a charge efficiency and an optional from/to state-of-charge window. Everything is computed locally and deterministically, so it is instant and private. Real-world figures depend on temperature, age, C-rate and the discharge curve, so treat the results as estimates. Ideal for consumer-electronics and IoT tools, solar and off-grid sizing, drone and RC planning, UPS and backup-power sizing, and EV and battery-pack design. Pure local computation — no key, no third-party service, instant. Live, nothing stored. 4 endpoints. This is battery maths; for Ohm's-law voltage/current/resistance use an electronics API.

api.oanor.com/battery-api

Photography Exposure API

Photographic exposure maths as an API, computed locally and deterministically — the exposure-value, equivalent-exposure and Sunny-16 numbers a photographer, camera-app developer or educator works the exposure triangle with. The exposure-value endpoint gives EV = log₂(aperture² ÷ shutter) and the ISO-100-normalised EV100 (subtracting log₂(ISO/100)) — every one-EV step is a stop, a doubling or halving of light — so bright sun reads about EV 15 and a typical interior EV 6–8, and equal-EV settings give the same exposure. The equivalent endpoint applies the reciprocity at the heart of the triangle: exposure ∝ shutter × ISO ÷ f-number², so when you close the aperture or drop the ISO it returns the new shutter that keeps the brightness constant — going from f/2.8 to f/5.6 needs four times the shutter time. The sunny16 endpoint gives the classic meterless rule: in bright sun shoot f/16 at about 1/ISO (1/125 s at ISO 100), opening up in stops for softer light — slight overcast f/11, overcast f/8, heavy overcast f/5.6, open shade f/4, and f/22 on snow or sand — solving the shutter for your chosen ISO and aperture. Everything is computed locally and deterministically, so it is instant and private. Ideal for camera and photography apps, exposure-calculator and teaching tools, and metering and automation utilities. Pure local computation — no key, no third-party service, instant. 3 compute endpoints. For depth of field and hyperfocal distance use a photography (optics) API.

api.oanor.com/exposure-api

EV Charging API

Electric-vehicle charging maths as an API, computed locally and deterministically — the three numbers every EV driver and charging app actually needs. The charge-time endpoint gives how long a session takes: from the battery size and the gap between the starting and target state of charge it works out the energy to add and the time at a given charger power and efficiency — a 60 kWh battery from 20 % to 80 % on a 7.2 kW home charger at 90 % efficiency takes about 5.6 hours, and it reminds you that DC fast charging slows sharply above 80 % so road trips should be planned around the fast part of the curve. The range-added endpoint turns a charging session into miles: from the charger power, the minutes plugged in and the car's miles per kWh it gives the energy and range added, plus the handy "miles per hour of charging" figure — a 7 kW home charger adds roughly 22 mi/hr, a 150 kW DC station hundreds. The cost endpoint gives what a charge costs, correctly billing the energy drawn from the grid (the energy to the battery divided by the charging efficiency) times the price per kWh, with the effective cost per usable kWh — home overnight rates make EV miles very cheap while DC fast chargers cost several times more. Everything is computed locally and deterministically, so it is instant and private. Ideal for EV apps, route and trip planners, fleet and charging-station tools, charge-cost calculators and dashboards. Pure local computation — no key, no third-party service, instant. Estimates — real DC charging tapers above 80 % and cold weather cuts range. 3 compute endpoints. For battery runtime use a battery API; for generic energy cost use an energy-cost API.

api.oanor.com/evcharging-api

Frequently asked questions

Quick answers about pricing, quotas, and integration.

How do I get an API key for Battery Pack API?
Sign up for free at oanor.com, generate an API key from the developer dashboard, and call Battery Pack API with the x-oanor-key header. No credit card needed for the free tier.
What's the rate limit for Battery Pack API?
Free tier allows 1 request per second. Paid plans scale up to 50 requests per second on the Mega tier. Hard limits return HTTP 429 above the quota — no surprise overage charges.
How much does Battery Pack API cost?
Battery Pack API has a free tier with 100 calls / month. Paid plans start at €9.40 / month with higher quotas and faster rate limits.
Can I cancel my subscription anytime?
Yes. Plans are billed monthly and you can cancel anytime from your billing dashboard. No long-term contracts and no cancellation fee.
Is Battery Pack API GDPR-compliant?
All requests to Battery Pack API go through our EU-based gateway. Your upstream API key never leaves our server and no personal data is shared with the upstream provider beyond the request you send.

Pick an endpoint from the list on the left to see its details and try it.

Code snippets

Sign up to get an API key, then call any path under your slug.

curl https://api.oanor.com/batterypack-api/SOME_PATH \
  -H "x-oanor-key: oanor_test_..."
const res = await fetch("https://api.oanor.com/batterypack-api/SOME_PATH", {
  headers: { "x-oanor-key": "oanor_test_..." }
});
const data = await res.json();
$ch = curl_init("https://api.oanor.com/batterypack-api/SOME_PATH");
curl_setopt($ch, CURLOPT_RETURNTRANSFER, true);
curl_setopt($ch, CURLOPT_HTTPHEADER, ["x-oanor-key: oanor_test_..."]);
$response = curl_exec($ch);
import requests
r = requests.get(
    "https://api.oanor.com/batterypack-api/SOME_PATH",
    headers={"x-oanor-key": "oanor_test_..."},
)
print(r.json())

Ratings

Sign in to rate.

No reviews yet.

Discussion

Ask questions, share usage tips, get answers from the provider and other developers. Public — anyone can read.

Sign in to start a thread or reply.

Sign in

New thread

/ 4000

📌 Pinned 🔒 Locked

·

· ·

/ 4000

🔒 This thread is locked — no new replies.

  • No threads yet — start the discussion.

Support

Private 1:1 support with the provider — billing questions, integration issues, account problems. Only you and the provider team can see these threads.

Sign in to open a support ticket.

Sign in

Open new ticket

Describe what you need help with. The provider team gets an email and replies on the ticket page.

  • No tickets yet for this API.

Subscription active — calls can start immediately.

Send your first request —

Subscription active — copy a snippet and fire off your first call.